Press Releases

FESPA outlines COVID-safe practices for upcoming Global Print Expo and European Sign Expo 2021

by FESPA | 30/09/2021
FESPA outlines COVID-safe practices for upcoming Global Print Expo and European Sign Expo 2021

In less than two weeks, FESPA Global Print Expo and European Sign Expo (12 – 15 October 2021) will return to the RAI, Amsterdam, The Netherlands. To safeguard visitors, exhibitors, staff and contractors, FESPA will operate a number of COVID-safe practices.

Entry requirements and navigating the exhibition halls

This year, visitors will be required to register before attending the event to obtain their digital entry QR code which will be held on participants’ phones. The entry requirements for the venue specify that all attendees must provide proof that they are double vaccinated, have recently recovered from COVID-19, or have received a negative COVID test before entering. For European travellers, this will be facilitated via the EU Digital COVID Certificate (DCC)* and printed proof of vaccination from non-European countries will also be accepted. These measures aim to minimise the risk of spreading the virus in the exhibition. In addition to proof of vaccination or negative test result, before entering, all visitors will be asked a series of health questions.

Participants that are unable to provide proof of vaccination can still visit FESPA under the 'impact to Dutch economy' exemption. To do this, visitors will need to fill the Quarantine Declaration Form and tick the box that indicates that they fall into the exemption category. To accompany the Quarantine Declaration From, visitors require an invitation letter from the RAI, which FESPA will issue upon request. Attendees who are not fully-vaccinated will also need to provide a negative test result each day (test results are only valid for 24 hours). Free-of-charge rapid antigen testing will be available onsite at the RAI.

Following recent guidance from the Dutch government, social distancing and wearing facemasks are no longer mandatory but FESPA recommends that each attendee takes the safety precautions that help them feel safe. To support this, a ‘traffic light system’, where visitors can wear a red, orange or green badge, will enable everyone to indicate their personal preferences around physical contact. The floorplan features wider aisles and floor markings will be in place where queues may form, which will allow for the easier flow of visitors around the event.

When arriving or leaving the RAI, crowd management and traffic protocols will be used to ensure attendees arrive and leave the show as safely as possible.

Cleaning & hygiene measures

Strict cleaning and hygiene measures in place, include:  

  • Staff will be following a rigorous master cleaning plan, supported by a COVID-19 hygiene plan, covering everything from special vacuum-cleaner filters to extra antiseptic surface wiping and increased toilet cleaning.
  • A newly reconfigured and recalibrated air ventilation system, based on guidance issued by the Dutch National Institute for Public Health and the Environment (RIVM).
  • Advanced waste disposal procedures
  • The use of sustainable disposable single-use cups and cutlery in all catering facilities
  • Access to hand sanitiser, soap, napkins, antiseptic wipes and other cleaning materials, including contactless sanitiser stations at key locations and signposted throughout the venue.
  • A medical isolation room, staffed by personnel trained in COVID-19 prevention, detection and emergency response.

Contactless experience

To further minimise physical touchpoints throughout the exhibition, visitors can use QR codes to access online brochures, magazines and product information, and connect with suppliers. This will be facilitated by FESPA’s event partner, VISIT Connect. Once registered, attendees will receive links to an online portal and QR code for entry.

Neil Felton, CEO, FESPA comments, “Health and safety is paramount at FESPA Global Print Expo and European Sign Expo 2021 and we have been working closely with the RAI, Dutch Government, the National Institute of Public Health and the Environment and the city’s Municipal Health Service to ensure that we’re following the latest guidance to safeguard all participants. There will, of course, be differences in the way the 2021 events run, but we believe that printers that are keen to experience a live FESPA event again can do so with a high level of confidence in the measures being taken by FESPA and the RAI to protect them.”
For further information and frequent updates on COVID regulations at the exhibition, visit: https://www.fespaglobalprintexpo.com/show-information/covid-19-update. For the latest travel updates, visit: https://www.government.nl/topics/coronavirus-covid-19/visiting-the-netherlands-from-abroad.

To register to attend FESPA Global Print Expo and European Sign Expo 2021, visit: https://registration.gesevent.com/survey/225ttiyimyer0. Visitors can benefit from a €30 discount on their entry ticket by quoting code FESM127.

by FESPA Back to News

Topics

Interested in joining our community?

Enquire today about joining your local FESPA Association or FESPA Direct

Enquire Today

Recent news

Features

COP 27: what can the printing industry do to fight against climate change?

COP 27 took place on 20th November, taking place in the Egyptian coastal city of Sharm el-Sheikh. The conference offered many takeaways for companies and industries and encouraged them to take global action to make positive changes regarding climate change.

25-11-2022
Features

What are the Challenges when Starting a Designer Fashion Brand?

Debbie McKeegan shares insights on the evolving marketplace for designer fashion brands. In addition, she details the challenges faced when creating a designer Fashion brand.

23-11-2022
Features

Personalised products - the future of Digital Printing

Customers are becoming more conscious of their consumption. There is an increasing demand for authentic, personalised products which is taking over plain industrial goods. For printers, this offers a new sustainable growth opportunity.

21-11-2022
Features

How to prevent machine breakdowns to improve productivity 

Nessan Cleary discusses the importance of understanding how components are wearing and how this can prevent machine breakdowns to improve and increase productivity.

17-11-2022