Features

Snap, crackle, pop: recycled packaging

by FESPA | 10/04/2017
Snap, crackle, pop: recycled packaging

Most people are confused as to whether a particular piece of flexible plastic packaging can be recycled or not, which makes recycling almost an inconvenience. 

A UK project called Reflex is looking at solutions to the problem, writes Laurel Brunner.

It is one of the most useful and yet annoying forms of packaging we have. It’s useful because it works with all sorts of content types, from clothing to soup. 

But it’s annoying because most people are confused as to whether a particular piece of flexible plastic packaging can be recycled or not. The secret codes and logos plastics carry mean little to the average consumer, so it’s hard to tell the desirable from the undesirable.

This confusion is not good, because it makes recycling something that requires thought, almost an inconvenience. And when in doubt, rather than risk polluting what might otherwise be a pristine batch of recyclate, people may opt to throw the material away for incineration or landfill. 

This is not good either. But how can we improve how we handle waste that is hard to recycle? And should the streaming decision be up to consumers at all? Ideally recycling plants should be able to handle all of it, and without requiring people to do the sorting. Let’s face it, people simply won’t bother if the recycling burden is too onerous.

Fortunately, work has been done to see what possible solutions there might be to this problem. The Reflex (Recycling of Flexible Packaging) research and development project is a two-year collaborative effort funded by the UK government and various global brands. 

The project involved brand owners packaging printers, recycling companies and technology developers. These include Amcor Ltd, one of the world’s largest suppliers of flexible and rigid packaging materials, along with the likes of Nestlé and Unilever. 

The project found that 80% of the flexible packaging being sent off for recycling is suitable for reprocessing. The 20% that is not however will have to be handled by new facilities able to handle all forms of the material, and by modifying sorting facilities so that rogue flexible plastic packaging is either removed or processed.

The project’s objective for this two year effort was to “create a circular economy for flexible packaging” through improved understanding of the various steps in flexible packaging supply chains. For the UK, this could mean sending less of its 414,000 tonnes annually of plastics based packaging to landfill or for incineration. 

Together the partners looked at new types of mixed polymers and better identification and sorting systems. Everything from design to sorting and reprocessing was investigated with a view to making changes and improvements that support the circular economy.

An important outcome of the project is the preparation of a set of design guidelines for flexible packaging. This research document would encourage the use materials that can be recycled when they reach end of life, from the initial design to production. 

The idea is to provide advice on such things as polymer types and coatings, and their suitability for either mechanical recycling into new raw materials or for turning into energy.

The next step is to merge the Reflex project with broader European initiatives to work on optimising the circular economy for flexible packaging based on life cycles. What goes around, really should come around if this effort pays off.

Source: This article was produced by the Verdigris project, an industry initiative intended to raise awareness of print’s positive environmental impact. This commentary helps printing companies keep up to date with environmental standards, and how environmentally friendly business management can help improve their bottom lines. Verdigris is supported by the following companies: Agfa Graphics, Spindrift.click, EFI, FESPA, HP, Kodak, Kornit Digital, Ricoh, Splash PR, Unity Publishing and Xeikon.

by FESPA Back to News

Topics

Interested in joining our community?

Enquire today about joining your local FESPA Association or FESPA Direct

Enquire Today

Recent news

The Green Grads EPSON cco-cextile challenge graduates showcase their talents
Features

The Green Grads EPSON cco-cextile challenge graduates showcase their talents

Exhibiting at Manchester’s historic Victoria Baths during the Great Northern Contemporary Craft Fair the Epson Eco-Textile Challenge graduates received an enthusiastic welcome.

30-11-2023
Neil Felton on investing into the print community via FESPA Associations
Videos
7:50

Neil Felton on investing into the print community via FESPA Associations

FESPA's CEO, Neil Felton speaks to Debbie McKeegan about the important or reinvesting and supporting the print community. FESPA achieves this by investing into its 37 global Associations.

29-11-2023
Neil Felton on investing into the print community via FESPA Associations
Business development: screen printing or digital printing?
Features

Business development: screen printing or digital printing?

Screen printing and digital printing are 2 common printing processes in sign-making. But what are the differences between the 2, what are their advantages and disadvantages, and how can printers earn the most money using new technologies?

29-11-2023
Forgra Colour Management Symposium to offer guidance on how to improve efficiency and reduce waste
Blog

Forgra Colour Management Symposium to offer guidance on how to improve efficiency and reduce waste

Paul Sherfield speaks to Andy Kraushaar, Head of Pre-Press Technology at Fogra about the Fogra Colour Management Symposium coming up in February 2024 and why it’s an important event to help you improve efficiency and reduce waste.

28-11-2023