CRON reduces ink waste to almost nothing

by FESPA | 05/09/2017
CRON reduces ink waste to almost nothing

Chinese developer of computer-to-plate (CtP) systems CRON has developed the EZcolor printing system that is says controls ink volumes and cuts ink waste.

Intelligent resource management is what sustainability is really all about, whether you are a research scientist or a provider of technologies for graphics production. Brainy people keep coming up with new tools to help graphics professionals to improve process control, cut waste and reduce resource usage.

Digital printing has stolen a lot of the sustainability limelight over the last few years, primarily because of its ability to produce custom documents in runs of predetermined run length. However, makers of other kit, including platesetters, have not been idle.

CRON, a Chinese developer and manufacturer of computer-to-plate (CtP) systems, has developed the EZcolor intelligent printing system, to control ink volumes and reduce ink waste to almost nothing, allegedly. The system replaces a conventional mechanical ink duct with an ink pumping system.

A dedicated database controls the ink pumping by calculating how much ink is needed for each inkzone for a given printing condition. Calculations are based on profiles, required densities and print speed, and assume the use of CRON plates and punching technologies.

CRON claim that their combined system makes it possible to achieve compliance with ISO 12647-2 (process control for offset lithography) and to do so with a single click.

The approach can yield considerable savings in paper and ink, and cut the carbon footprint of the printed product. This also reduces costs associated with production: CRON claims that paper waste is cut by some 90% and that energy consumption is also substantially reduced.

The system requires no colour adjustment and cuts makeready times to less than ten minutes and ink ducts do not need to be cleaned during operation. Accurate colour means less human intervention on press to control colour quality.

And of course, there is the inevitable comparison with digital that all developers of technologies for analogue printing have to make. In CRON’s example offset can have a breakeven of twenty copies, below which digital is more cost effective.

CRON has developed some other new technologies that are intended to help reduce negative environmental impacts. The Emerald low chemistry negative plate apparently has a “more stable dot, better ink transmission, higher printing resistance and bring savings on printing ink between 10% – 20%.”

The plate is good for 50,000 impressions without baking or 20,000 for UV printing. It holds a 1 to 98% 20-micron dot so the Emerald plate works with stochastic screening or conventional screening up to 200 lpi. This is not a true processless plate but rather one with low chemistry. By this CRON means that the plate is processed in a solution that is nontoxic and noncorrosive.

Reducing waste and rework in printing and converting operations is ever more critical, not just for the environment but for bottom lines. Better management of plate processing and of ink consumption can help address both environmental sustainability and the commercial kind.

Source: This article was produced by the Verdigris project, an industry initiative intended to raise awareness of print’s positive environmental impact. This commentary helps printing companies keep up to date with environmental standards, and how environmentally friendly business management can help improve their bottom lines. Verdigris is supported by the following companies: Agfa Graphics, Spindrift.click, EFI, FESPA, HP, Kodak, Kornit Digital, Ricoh, Splash PR, Unity Publishing and Xeikon.

by FESPA Back to News

Topics

Interested in joining our community?

Enquire today about joining your local FESPA Association or FESPA Direct

Enquire Today

Recent news

How to master colour measurement in digital printing with Barbieri
Colour Management

How to master colour measurement in digital printing with Barbieri

In this podcast episode, Debbie McKeegan interviews Viktor Lazzeri, COO of Barbieri Electronics, to discuss the critical role of spectrophotometers in achieving colour accuracy in digital printing.

05-12-2024
FESPA Awards - excellence in interior printing, printed labels and packaging
Interior printing

FESPA Awards - excellence in interior printing, printed labels and packaging

FESPA Awards have become a highlight in the print and signage industry, showcasing the best in creativity, technical expertise, and sustainability across 18 specialist categories judged by a panel of industry professionals. This article highlights 3 winners from 2023, CGI Creative Graphics, Bell Printers, and X-Treme Creations whose work demonstrated the innovative possibilities in interior print, labels and packaging.

03-12-2024
The importance of automation and digitalisation in textile printing
Textile Printing

The importance of automation and digitalisation in textile printing

The Procedes Group is one of the biggest organisations in textile printing. Automation and digitalisation play a key role in this. Sonja Angerer speaks to Managing Director Alexander Beilken and discusses how the company based in Lemwerder managed to achieve this.

29-11-2024
How Epson's cutting-edge technology is redefining textile printing
Textile Printing

How Epson's cutting-edge technology is redefining textile printing

Debbie McKeegan speaks to Francesco Nozza, Business Development Manager at Epson Italia about his insights on the future trends of industrial direct-to-textile printing using digital technologies.

28-11-2024