Blog

Designed to be Sustainable

by FESPA | 20/12/2021
Designed to be Sustainable

Laurel Brunner discuss 3 key objectives of having a Circular Economy, which includes designing products that eliminate waste and pollution; keeping products and materials in use for as long as possible; and supporting the regeneration of natural systems.

The ideas behind the Circular Economy aren’t much talked about in the grass roots printing business, but some of the principles are starting to creep into conversations. Three main objectives underpin a circular economy: design products to eliminate waste and pollution; keep products and materials in use for as long as possible; and support the regeneration of natural systems. It might be by accident but changes to how print media products are designed and produced, are bringing our industry into closer alignment with Circular Economy principles.

Print Service Providers (PSP) printing on paper substrates obviously contribute to recycling and regeneration. Printers produce most of their prints on paper and efforts to improve plastics recycling continue to gain ground. Digital printers often specialise in high value short run work produced on demand and in the required quantities. This is obviously less wasteful than the disposable print created on spec in case someone might want it. They also deliver high value print products that consumers want to keep. We treasure work such as photo albums and family posters especially if it is customised. Packaging printers are designing packaging to minimise materials and waste for brand owners who want greater environmental sustainability for their products. And across printing methods, printers are raising the quality of their output whilst simultaneously improving production efficiency to minimise waste.

Beyond digital printing companies are using other techniques to enhance value, such as innovative screen technologies that help optimise output quality on different substrates like kraft or uncoated papers. This takes digital colour management a step further, because it exploits screening technologies within the colour managed workflow. It’s also an approach companies can take to get older presses to perform better. We have spoken to a number of printers using new screening methods who say that the technology has also made possible very fast start-up and improved chromatic stability on long runs, as well as easier cleaning. It all makes for more sustainable production.

Innovation of this sort allows print buyers to use different printing methods with greater confidence. We’re seeing a clear migration away from gravure printing for instance. Sometimes it’s to offset or flexo, but for short run work it’s often to digital printing. Buyers can trust that there are PSPs around who will deliver, including digital printers. We are not yet seeing a clear preference for any particular digital printing technology, but inkjet is starting to gain ground in some packaging applications on the basis of improved quality and speed.

As brand owners start paying more attention to how print products are designed, PSPs are well placed to help. Technology that allows for control over run lengths, improved ink usage and recyclability all make a positive contribution to the sustainability conversation. And that’s a big positive for the Circular Economy of print.

This article was produced by the Verdigris Project, an industry initiative intended to raise awareness of print’s positive environmental impact. This weekly commentary helps printing companies keep up to date with environmental standards, and how environmentally friendly business management can help improve their bottom lines. Verdigris is supported by the following companies: Agfa GraphicsEFIFespaFujifilmHPKodakMiraclonRicohSplash PRUnity Publishing and Xeikon.
 
 

by FESPA Back to News

Interested in joining our community?

Enquire today about joining your local FESPA Association or FESPA Direct

Enquire Today

Recent news

Industry

First Screen Printing Museum opens in Filderstadt showcasing "Domberger Collection"

The first ever screen printing museum in Filderstadt, Baden-Württemberg, Germany, has opened. It is already being treated as a "beacon of the history of artistic screen printing". The museum showcases the famous "Domberger Collection".

26-05-2022
Features

Opportunities for UV LED Printing in the Interior Decor Marketplace at Printeriors 2022

Debbie McKeegan discusses new commercial opportunities available within the décor industry. As inks have evolved, the UV process now offers exceptional durability for Interior applications many of which can be seen at Printeriors at FESPA Global Print Expo 2022.

25-05-2022
Press Releases

Ready to experience print in motion at FESPA Global Print Expo and European Sign Expo 2022

The doors to FESPA Global Print Expo and European Sign Expo 2022, Europe’s leading exhibitions for speciality print, signage and visual communications, will open in just a few days (31 May – 3 June 2022 at Messe Berlin, Germany).

24-05-2022
Blog

Experience Print in Motion: in conversation with our exhibitors 

FESPA's Head of Global Print Expo, Mike Ryan shares his conversations with the sponsors of this show as well as highlighting the key trends that are driving innovation in the speciality print, signage and visual communication industries.

20-05-2022