Nano particles in inks
Laurel Brunner discusses the use of nano particles in inks in the print industry and how this may affect the environment and human health.
Right now, there are amazing innovations going on with inks as the graphics industry tries to sustain its competitive edge and improve its environmental impacts. Nano inks are used in predominantly sensors, ceramics printing and printed electronics. In the last few years they have been used for commercial and packaging printing since they result in enhanced colour gamut and print quality. We don’t know much about the effect of these inks on the environment or overall human health. One would hope that the impact on human health has been sufficiently researched and tested, however this seems to be more a hope than a reality.
The problem is that nano particles are extremely small, therefore they do not act like normal molecules do. The way in which molecules behave helps us to determine if something such as ink recipe is toxic or not. Their toxicity is dependent on both physical and chemical properties including the particle’s crystalline structure, size, shape, purity, surface electric charge and how the internal and shell components of the particle are constructed. All these factors determine how the nano particle behaves, for example when it enters the bloodstream or is printed or printed and coated onto a barrier surface.
Therefore, nano pigments that are found in inks are a cause for concern. Recently, the European Chemicals Agency (ECHA) reported a new study that looked closely at the state of research into nanomaterials. The European Union (EU) Observatory for Nanomaterials (EUON) has published a list of the substances it has identified as nano-sized pigments (77) and four filler pigments that are used to bulk up inks and lower their cost. The report also demonstrates “gaps in the current knowledge on the hazard and risk assessment of nano-sized pigments.”
The report based its findings on what could be found in various nanomaterials inventories including nano materials listed in the EU’s Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) regulation. The report also shows data from Belgian, Danish and French government sources. REACH regulates the use of chemicals and how they are produced, with restrictions based on their human health and environmental impacts. REACH affects all industries in Europe that use chemicals and extends beyond the EU’s borders for goods sold into the region. REACH data is usually considered to be very robust and yet the EUON report concludes that “data for hazard and risk assessment aren’t available for the majority of identified nano pigments”. This is very worrying and could potentially have a serious impact on current and new ink technologies, particularly those designed for packaging printing.
The problem of knowing how nano pigmented inks will influence human health is not just a concern for the EU. It has implications for all media markets across the world. The report showed that the data that is available is usually unreliable to the point of being contradictory. The EUON’s goal was to collect more information about the 81 nano-sized pigments used in the EU. However, what they discovered is a lack of reliable information on toxicology data regarding nano pigments. In other words, we don’t know if nano pigments are poisonous or how they perform once printed.
Source: This article was produced by the Verdigris project, an industry initiative intended to raise awareness of print’s positive environmental impact. This commentary helps printing companies keep up to date with environmental standards, and how environmentally friendly business management can help improve their bottom lines. Verdigris is supported by the following companies: Agfa Graphics, Spindrift.click, EFI, FESPA, HP, Kodak, Kornit Digital, Ricoh, Splash PR, Unity Publishing and Xeikon.
Topics
Interested in joining our community?
Enquire today about joining your local FESPA Association or FESPA Direct
Recent news
A printer's step-by-step guide to digital signage
James Matthews-Paul shares a step-by-step guide designed for printers who are interested in starting their journey in digital signage and adding this to their product offering.
Mimaki launches sustainable two-step textile transfer printing solution TRAPIS
Mimaki Europe announces the commercial release of its textile pigment transfer printing system, named “TRAPIS”. This system will be demonstrated with Mimaki’s inkjet printer, the TS330-1600, in Mimaki’s booth at FESPA Global Print Expo 2024 (Stand F10, Hall 12).
Personalised Apparel: How Customisation Adds Value
Third-generation garment producer, Samantha Taylor runs The Good Factory, a company specialising in sourcing fabrics, the development of sustainable sportswear and advising businesses on how they can implement sustainability throughout the manufacturing process and supply chain. Ahead of her talk at the 2024 Personalisation Experience conference (20 March at RAI Amsterdam, The Netherlands), she delves deeper into how print personalisation can add value to the customer while maintaining a healthy profit margin and improving a brand’s sustainability efforts.
Optimise efficiencies in print with CorelDRAW at FESPA Global Print Expo 2024
CorelDRAW share an insightful industry report which demonstrates how the print industry leverages design software to maximise efficiency and reduce waste and shares 6 benefits of incorporating state-of-the-art design software into your printing process.